TC Omega Barrel
These barrels are drop in replacements used with the factory action.
Convert your factory TC Omega into a high performance, smokeless capable muzzleloader. Nitrided, stainless steel barrel with a billet machined and welded lug. Includes ramrod guide. When using a brake and storing a ramrod on the rifle, a
ramrod guide spacer should be added.
Factory Omega's have a 1.00" shank and will fit factory stocks. If going to a 1.10" shank, inlet work will be required.
Cut rifled barrels are lapped to provide a consistent bore for smooth sizing applications.
Button barrels are not guaranteed to shoot smooth sized bullets and are more suited towards saboted bullets.
Order ramrod, ramrod guide*, picatinny rail and 209 Primer or LR Module breech separately.
*When using a brake, the standard ramrod lengths may be shorter than desired. Please contact us, this may require a special length ramrod. If storing a ramrod on the rifle with a brake, a ramrod guide spacer should be installed between the ramrod guide and barrel. A spin loader is also recommended and requires your ramrod be 2" shorter to be the correct length when installed.
Brake threads are 3/4-24
We provide two nitrided, stainless 10-32 mounting screws. These screws are longer than needed and are to be trimmed to the length you require.
Selections can be made when grayed out.
Factory Omega's have a 1.00" shank and will fit factory stocks. If going to a 1.10" shank, inlet work will be required.
Cut rifled barrels are lapped to provide a consistent bore for smooth sizing applications.
Button barrels are not guaranteed to shoot smooth sized bullets and are more suited towards saboted bullets.
Order ramrod, ramrod guide*, picatinny rail and 209 Primer or LR Module breech separately.
*When using a brake, the standard ramrod lengths may be shorter than desired. Please contact us, this may require a special length ramrod. If storing a ramrod on the rifle with a brake, a ramrod guide spacer should be installed between the ramrod guide and barrel. A spin loader is also recommended and requires your ramrod be 2" shorter to be the correct length when installed.
Brake threads are 3/4-24
We provide two nitrided, stainless 10-32 mounting screws. These screws are longer than needed and are to be trimmed to the length you require.
Selections can be made when grayed out.
Documents
List Number: